Active Optical Cable

        X-Krama's Active Optical Cables （AOC） uses a length of optical fiber cable to connect two optical transceivers. The signal transmission is carried out with the help of an external power supply. The transmission method is electrical-optical-electrical conversion. The electrical signal is converted into an optical signal in the A connector, and the optical signal is transmitted to the B connector through the middle fiber optic cable, and then

the The optical signal is converted into an electrical signal in the end connector.

        Active optical cable （AOC） has the characteristics of low power consumption, small size, light weight and strong heat dissipation. Compared with copper cables, the transmission distance (up to 100~300m) is longer and

the transmission performance is better. Compared with optical modules, active optical cables do not have the problem of interface contamination, which greatly improves the stability and reliability of the system, and reduces the management cost of the computer room.

  Features :

• Data rate up to 103.125 Gbps

• 4x 25Gb/s NRZ modulation

• Hot-pluggable QSFP28 and 4x SFP28 form-factor connectors

• 4 channels full-duplex active optical cables

• Length up to 70m on OM3 MMF, 100m on OM4 MMF

• 4x 850nm VCSEL array and PIN photo-detector array

• Compliant with QSFP28 MSA, IEEE 802.3bm 100GBASE-SR4 and IEEE 802.3by 25GBASE-SR

• Internal CDR circuits on both receiver and transmitter channels

• Support CDR bypass

• Low power dissipation

• RoHS compliant and lead-free

• Single +3.3V power supply

• Operating case temperature: Standard :  0 to +70°C

 Applications :

• 25G / 100G BASE Ethernet

• InfiniBand 4x SDR/DDR/QDR

• SAS, Servers, Hubs, Switches, Routers

• External storage systems

• Networked storage systems

• Data Center Network