Home >> POE Equipment >> Ethernet Switches >> Industrial Layer-2 Ethernet Switch

Direct Attach Cables

Industrial Layer-2 Ethernet Switch

Item: L2 Managed Industrial Ethernet Switch
Ethernet Ports: 4/8/16/24/48 *1000Mbps RJ45 or Custom
Uplink Ports: 2/4 *1000Mbps SFP or Custom
Applications: Industrial automation
Traffic control automation
The monitoring system

List price： 0.00

Price： 0.00

Product Description

Item: L2 Managed Industrial Ethernet Switch
Ethernet Ports: 4/8/16/24/48 *1000Mbps RJ45 or Custom
Uplink Ports: 2/4 *1000Mbps SFP or Custom
Applications: Industrial automation
Traffic control automation
The monitoring system

Layer-2 Managed Industrial Ethernet Switch

Layer 2 switches are located at layer 2 of the OSI model, the data link layer. Compared with ordinary switches,
the development of two-layer switching technology is relatively mature. The two-layer switches are data link layer
devices, which can identify the MAC address information in the packet and forward it according to the MAC
address. Moreover, the two-layer switches support line speed switching and have a higher throughput.

Layer 2 switch works at the data link layer. It can recognize the MAC address information in the packet, forward
it according to the MAC address, and record these MAC addresses and corresponding ports in its own internal
address table.

e.g. PN: X-E50802S-IN-L2M
( Managed Idustrial Ethernet Switch, 8*10/100/1000M RJ45 ports and 2*1000M SFP uplink ports )

Features:

● Uplink gigabit dual fiber ports,easy to achieve high bandwidth and long-distance transmission.

● Dual SFP fiber ports can cascade, chain, compatible with SFP module connection.

● Contact discharge 8KV, air discharge 15KV; port lightning protection common-mode 4KV, differential mode 2KV

● Operation temperature at -40~+75°C;5%~90% RH Non condensing
● Support IEEE 802.3x full duplex flow control and Backpressure half duplex flow control.
● Each port supports MDI/MDIX automatic rollover and duplex/rate self-negotiation.
● High standard electromagnetic anti-interference protection design
● Non-PoE DC INPUT: 12-48V.

Specifications:

Model	X-E50802S-IN-L2M
Interface Characteristics
Fixed Port	8*10/100/1000Base-T RJ45 ports (Data)
	2*100/1000Base-X uplink SFP fiber slot ports (Data)
	1 * RS232 console port(115200,N,8,1)
	2 sets of V+, V- redundant DC power interface (5 Pin Phoenix terminal)
Ethernet Port	Port 1-8 support 10/100/1000Base-T auto-sensing, full/half duplex MDI/MDI-X self-adaption
Twisted Pair Transmission	10BASE-T: Cat3,4,5 UTP(≤100 meter)
	100BASE-TX: Cat5 or later UTP(≤100 meter)
	1000BASE-T: Cat5e or later UTP(≤100 meter)
SFP Slot Port	Gigabit SFP optical fiber interface, default matching optical modules (optional order single-mode / multi-mode, single fiber / dual fiber optical module. LC)
Optical Cable	Multi mode: 850nm 0 ~ 500M,single mode: 1310nm 0 ~ 40KM, 1550nm 0 ~ 120KM.
Chip Parameter
Network Management Type	L2+
Network Protocol	IEEE802.3 10BASE-T, IEEE802.3i 10Base-T,
	IEEE802.3u 100Base-TX,
	IEEE802.3ab 1000Base-T
	IEEE802.3z 1000Base-X
	IEEE802.3x
Forwarding Mode	Store and Forward(Full Wire Speed)
Switching Capacity	192Gbps
Forwarding	14.88Mpps
Rate@64byte	14.88Mpps
MAC	8K
Buffer Memory	4M
Jumbo Frame	9.6K
LED Indicator	Power: PWR (yellow), system :SYS (yellow), network ;Link (yellow), Fiber port: L/A(green)
Reset Switch	Yes, Press and hold the reset switch for 10s and release it to restore the factory settings
Power
Working Voltage	48-57VDC, 5 Pin industrial Phoenix terminal, support anti-reverse protection.
Power Consumption	Standby<8W, Full load<12W
Power Supply	No, optional 24V/24W industrial power supply
Physical Parameter
Operation TEMP / Humidity	-40~+80°C;5%~90% RH Non condensing
Storage TEMP / Humidity	-40~+85°C;5%~95% RH Non condensing
Installation	Desktop, DIN rail
Certification & Warranty
Port lightning protection / protection level	Lightning protection: 6KV 8/20us;Protection level: IP40
	IEC61000-4-2(ESD):±8kV contact discharge,±15kV air discharge
	IEC61000-4-3(RS):10V/m(80~1000MHz)
	IEC61000-4-4(EFT): power cable:±4kV; data cable:±2kV
	IEC61000-4-5(Surge):power cable:CM±4kV/DM±2kV; data cable:±4kV
	IEC61000-4-6(radio frequency transmission):10V(150kHz~80MHz)
	IEC61000-4-8(power frequency magnetic field):100A/m;1000A/m ,1s to 3s
	IEC61000-4-9(pulsed magnet field):1000A/m
	IEC61000-4-10(damped oscillation):30A/m 1MHz
	IEC61000-4-12/18(shockwave):CM 2.5kV,DM 1kV
	IEC61000-4-16(common-mode transmission):30V; 300V,1s
	FCC Part 15/CISPR22(EN55022):Class A
	IEC61000-6-2(Common Industrial Standard)
Mechanical Properties	IEC60068-2-6 (anti vibration)
	IEC60068-2-27 (anti shock)
	IEC60068-2-32 (free fall)
Certification	CCC;CE mark, commercial; CE/LVD EN60950;FCC Part 15 Class B; RoHS;
Warranty	5 years, lifelong maintenance.
Network Management Features
Interface	IEEE802.3X (Full-duplex)
	Port temperature protection setting
	Port green Ethernet Energy-saving setting
	Broadcast storm control based on port speed
	The speed limit of the message flow in the access port.
	The minimum particle size is 64Kbps.
Layer 3 Features	L2+ network management ,IPV4/IPV6 management
	L3 soft routing forwarding,
	Static route, Default route @ 128 pcs, APR @ 1024 pcs
VLAN	4K VLAN based on port, IEEE802.1q
	VLAN based on the protocol
	VLAN based on MAC
	Voice VLAN, QinQ configuration
	Port configuration of Access, Trunk, Hybrid
Port Aggregation	LACP, Static aggregation
Port Aggregation	Max 5 aggregation groups and 8 ports per group.
Spanning Tree	STP (IEEE802.1d),RSTP (IEEE802.1w),MSTP (IEEE802.1s)
Industrial Ring Network Protocol	G.8032 (ERPS),Recovery time less than 20ms
Industrial Ring Network Protocol	250 Ring at most, Max 1024 devices per ring.
Multicast	MLD Snooping v1/v2,Multicast VLAN
Multicast	IGMP Snooping v1/v2, Max 1024 multicast groups, Fast log out
Port Mirroring	Bidirectional data mirroring based on port
QoS	Flow-based Rate Limiting
	Flow-based Packet Filtering
	8*Output queues of each port
	802.1p/DSCP priority mapping
	Diff-Serv QoS,Priority Mark/Remark
	Queue Scheduling Algorithm (SP, WRR, SP+WRR)
ACL	Port-based Issuing ACL,ACL based on port and VLAN
ACL	L2 to L4 packet filtering, matching first 80 bytes message. Provide ACL based on MAC, Destination MAC address, IP Source, Destination IP, IP Protocol Type, TCP/UDP Port, TCP/UDP Port Range, and VLAN, etc.
Security	IP-MAC-VLAN-Port binding
	ARP inspection,Anti-DoS attack
	AAA & RADIUS,MAC learning limit
	Mac black holes,IP source protection
	IEEE802.1X & MAC address authentication
	Broadcast storm control,Backup for host datum
	SSH 2.0,SSL,Port isolation,ARP message speed limit
	User hierarchical management and password protection
DHCP	DHCP Client,DHCP Snooping,DHCP Server,DHCP Relay
Management	One-key recovery
	Cable Diagnose,LLDP
	Web Management (HTTPS)
	NTP,System work log,Ping Test
	CPU instant utilization status view
	Console/AUX Modem/Telnet/SSH2.0 CLI
	Download & Management on FTP, TFTP, Xmodem, SFTP,SNMP V1/V2C/V3
	ONV NMS - smart network management system platform(LLDP+SNMP)
System	Category 5 Ethernet network cable
	Web browser: Mozilla Firefox 2.5 or higher, Google browser chrome V42 or higher, Microsoft Internet Explorer10 or later;
	TCP/IP, network adapter, and network operating system (such as Microsoft Windows, Linux, or Mac OS X) installed on each computer in a network

P/N Product Description

X-E50401S-IN-L2M	L2 Managed Industrial Ethernet Switch, 5x 10/100/1000M RJ45 ports
X-E50402S-IN-L2M	L2 Managed Industrial Ethernet Switch, 4x 10/100/1000M RJ45 ports + 2x 1000M SFP uplink ports
X-E50802S-IN-L2M	L2 Managed Industrial Ethernet Switch, 8x 10/100/1000M RJ45 ports + 2x 1000M SFP uplink ports
X-E50804S-IN-L2M	L2 Managed Industrial Ethernet Switch, 8x 10/100/1000M RJ45 ports + 4x 1000M SFP uplink ports
X-E51604S-IN-L2M	L2 Managed Industrial Ethernet Switch, 16x 10/100/1000M RJ45 ports + 4x 1000M SFP uplink ports
X-E52404S-IN-L2M	L2 Managed Industrial Ethernet Switch, 24x 10/100/1000M RJ45 ports + 4x 1000M SFP uplink ports
X-E54804S-IN-L2M	L2 Managed Industrial Ethernet Switch, 48x 10/100/1000M RJ45 ports + 4x 1000M SFP uplink ports

Prev: Idustrial Layer-3 Ethernet Switch

Next: Industrial Ethernet Switch

Best Sales

10G DWDM SFP+ 100km 50GHz C17-C61 Module

10G DWDM SFP+

市场价:0.00

价格:0.00

 P/N:                                 10G DWDM SFP+ 100km Max Data Rate:              10.3 Gbps Mode:                             Single-mode Connector:                     LC Duplex Fiber Type:                     SMF Wavelength:                   DWDM 50 GHz ITU Grid, C-Band  ( Total 89 channles ) Max Distance:                100 km DDM:                               With DDM(default) / without DDM Transmitter:                    DWDM EML Receiver:                         DWDM APD TX Power:                       +1.0 ~ +5.0 dBm Receiver Sensitivity:      ≤ -24 dBm Temperature:                  0 to +70℃  (Comericial)   /   -40 to +85℃  (Industrial)        Compatible:                    Cisco,  HP,  Brocade,  Juniper Networks,  H3C,  Huawei,                                             Arista Networks,  etc.  or   Custom
10G DWDM SFP+ 80km 50GHz C17-C61 Module

10G DWDM SFP+

市场价:0.00

价格:0.00

 P/N:                                 10G DWDM SFP+ 80km Max Data Rate:              10.3 Gbps Mode:                             Single-mode Connector:                     LC Duplex Fiber Type:                     SMF Wavelength:                   DWDM 50 GHz ITU Grid, C-Band  ( Total 89 channles ) Max Distance:                80 km DDM:                               With DDM(default) / without DDM Transmitter:                    DWDM EML Receiver:                         DWDM APD TX Power:                        0 ~ +5.0 dBm Receiver Sensitivity:      ≤ -23 dBm Temperature:                  0 to +70℃  (Comericial)   /   -40 to +85℃  (Industrial)        Compatible:                    Cisco,  HP,  Brocade,  Juniper Networks,  H3C,  Huawei,                                             Arista Networks,  etc.  or   Custom
10G DWDM SFP+ 40km 50GHz C17-C61 Module

10G DWDM SFP+

市场价:0.00

价格:0.00

 P/N:                                 10G DWDM SFP+ 40km Max Data Rate:              10.3 Gbps Mode:                             Single-mode Connector:                     LC Duplex Fiber Type:                     SMF Wavelength:                   DWDM 50 GHz ITU Grid, C-Band  ( Total 89 channles ) Max Distance:                40 km DDM:                               With DDM(default) / without DDM Transmitter:                    DWDM EML Receiver:                         DWDM PIN TX Power:                        -2.0 ~ +4.0 dBm Receiver Sensitivity:      ≤ -16 dBm Temperature:                  0 to +70℃  (Comericial)   /   -40 to +85℃  (Industrial)        Compatible:                    Cisco,  HP,  Brocade,  Juniper Networks,  H3C,  Huawei,                                             Arista Networks,  etc.  or   Custom

< 12 >