- Home
- Products
- Fiber Optic Transceivers
- FC/SDI/CPRI Transceivers
- WDM Network
- Open Line System
- POE Equipment
- Fiber Splitters
- Fiber Optic Cabling
- Fiber Cable Assemblies
- About US
- Contact us
Direct Attach Cables
16G BIDI FC SFP+ 20km Tx1330nm/Rx1270nm Module
P/N: 16G BIDI FC SFP+
Max Data Rate: 14.025 Gbps
Mode: Single-mode
Connector: LC Duplex
Fiber Type: SMF
Wavelength: Tx 1330nm / Rx 1270nm
Max Distance: 20 km
DDM: With DDM(default) / without DDM
Transmitter: 1330nm DFB
Receiver: 1270nm PIN
TX Power: -3.0 ~ +2.0 dBm
Receiver Sensitivity : ≤ -42.0 dBm
Temperature: 0 to +70℃ (Comericial) / -40 to +85℃ (Industrial)
Compatible: Cisco, HP, Brocade, Juniper Networks, H3C, Huawei, Arista Networks, etc. or Custom
P/N: 16G BIDI FC SFP+
Max Data Rate: 14.025 Gbps
Mode: Single-mode
Connector: LC Duplex
Fiber Type: SMF
Wavelength: Tx 1330nm / Rx 1270nm
Max Distance: 20 km
DDM: With DDM(default) / without DDM
Transmitter: 1330nm DFB
Receiver: 1270nm PIN
TX Power: -3.0 ~ +2.0 dBm
Receiver Sensitivity : ≤ -42.0 dBm
Temperature: 0 to +70℃ (Comericial) / -40 to +85℃ (Industrial)
Compatible: Cisco, HP, Brocade, Juniper Networks, H3C, Huawei, Arista Networks, etc. or Custom
Fibec Channel Transceiver Module
Fiber Channel (FC is a high-speed network data transmission protocol. Fibre Channel protocol can transmit
raw data in an orderly and lossless manner. It is mainly used for data transmission in data centers, computer servers,
switches, and storage networks.
The FC optical transceiver module follows the FC protocol and acts as an interface between fiber channel
systems and also an interface between fiber storage network devices. They are mainly used in Fibre Channel storage
network links in data centers. FC modules have the characteristics of miniaturization and low power consumption,
which can meet the needs of fast and lossless transmission of large amounts of information. FC optical modules
basically operate at Fibre Channel speeds ranging from 1Gbps to 128Gbps (1Gbps/2Gbps/8Gbps/16Gbps/32Gbps
/128Gbps ), and are expected to reach 256Gbps and 512Gbps. Common packages are SFP, SFP+, SFP28, SFP56
and QSFP28.
The storage area network (SAN) is isolated from the outside world, which can reduce the risk of attacks and
data leakage on the storage network. Therefore, it is safer to use FC optical modules in the storage network.
Features :
Support up to 14.025Gb/s data links
Up to 20km transmission on 9/125μm SMF
1330nm DFB transmitter, 1270nm PIN photo-detector
Single LC interface for Bi-directional Transmission
Compliant with SFP+ MSA and 16G Fibre Channel standards
Compatible with 4G/8G Fibre Channel standard and IEEE 802.3ae
Hot-pluggable SFP+ footprint
Low power dissipation
Metal enclosure, for lower EMI
RoHS compliant and lead-free
Single +3.3V power supply
Operating case temperature: Standard : 0 to +70°C / Industrial : -40 to +85°C
Applications :
Tri Rate 4.25Gbps / 8.5Gbps / 14.025Gbps Fiber Channel
P/N Product Description
X-BFC-16G23-10D | FC BIDI SFP+, 16Gb/s, 10km, LC, Tx1270nm/Rx1330nm, 0-70 degree, with DDM |
X-BFC-16G32-10D | FC BIDI SFP+, 16Gb/s, 10km, LC, Tx1330nm/Rx1270nm, 0-70 degree, with DDM |
X-BFC-16G23-20D | FC BIDI SFP+, 16Gb/s, 20km, LC, Tx1270nm/Rx1330nm, 0-70 degree, with DDM |
X-BFC-16G32-20D | FC BIDI SFP+, 16Gb/s, 20km, LC, Tx1330nm/Rx1270nm, 0-70 degree, with DDM |
X-BFC-16G23-10D-IN | FC BIDI SFP+, 16Gb/s, 10km, LC, Tx1270nm/Rx1330nm, -40 to +85 degree, with DDM |
X-BFC-16G32-10D-IN | FC BIDI SFP+, 16Gb/s, 10km, LC, Tx1330nm/Rx1270nm, -40 to +85 degree, with DDM |
X-BFC-16G23-20D-IN | FC BIDI SFP+, 16Gb/s, 20km, LC, Tx1270nm/Rx1330nm, -40 to +85 degree, with DDM |
X-BFC-16G32-20D-IN | FC BIDI SFP+, 16Gb/s, 20km, LC, Tx1330nm/Rx1270nm, -40 to +85 degree, with DDM |
Best Sales
About US
Address: Xinming High-tech Industrial Park, Y143
Bao'an District, Shenzhen, China
X-krama International Co., Limited
Product Category
E-mail:
Leave us a message：