P/N: 10G DWDM SFP+ 100km
Max Data Rate: 10.3 Gbps
Mode: Single-mode
Connector: LC Duplex
Fiber Type: SMF
Wavelength: DWDM 50 GHz ITU Grid, C-Band ( Total 89 channles )
Max Distance: 100 km
DDM: With DDM(default) / without DDM
Transmitter: DWDM EML
Receiver: DWDM APD
TX Power: +1.0 ~ +5.0 dBm
Receiver Sensitivity: ≤ -24 dBm
Temperature: 0 to +70℃ (Comericial) / -40 to +85℃ (Industrial)
Compatible: Cisco, HP, Brocade, Juniper Networks, H3C, Huawei, Arista Networks, etc. or Custom
P/N: 10G DWDM SFP+ 100km
Max Data Rate: 10.3 Gbps
Mode: Single-mode
Connector: LC Duplex
Fiber Type: SMF
Wavelength: DWDM 50 GHz ITU Grid, C-Band ( Total 89 channles )
Max Distance: 100 km
DDM: With DDM(default) / without DDM
Transmitter: DWDM EML
Receiver: DWDM APD
TX Power: +1.0 ~ +5.0 dBm
Receiver Sensitivity: ≤ -24 dBm
Temperature: 0 to +70℃ (Comericial) / -40 to +85℃ (Industrial)
Compatible: Cisco, HP, Brocade, Juniper Networks, H3C, Huawei, Arista Networks, etc. or Custom
10G DWDM SFP+ Transceiver Module
X-Krama's 10G DWDM ( Dense Wavelength Division Multiplexing ) SFP+ is an optical transceiver module that
can combine a set of optical wavelengths of light into a single-core fiber for transmission. The channel spacing of the
10G DWDM SFP+ optical transceiver modules are small,such as 0.4 nm, 0.8 nm, 1.6 nm, etc., and requiring additional
wavelength control devices.
A key advantage of the 10G DWDM SFP+ transceiver module is that its protocol and transmission speed are
irrelevant. The DWDM-based network can transmit data using IP protocol, ATM, SONET/SDH, and Ethernet protocols,
and the processed data traffic is between 100Mb/s and 400Gb/s. In this way, a DWDM-based network can transmit
different types of data traffic at different speeds on a single laser channel. From a QoS (Quality Service) perspective,
DWDM-based networks respond quickly to customer bandwidth requirements and protocol changes in a cost-effective
manner.
Our 10G DWDM SFP+ transceiver modules are available for all 100 GHz or 50Ghz C-band wavelengths on the
DWDM ITU grid. They are designed to MSA standards to ensure a wide range of network device compatibility. These
DWDM SFP+ transceiver modules are hot swappable and digital diagnostics functional areas via the I2C serial bus
specified in the SFP MSA SFF-8472. These modules are compliant with the IEEE802.3 Gigabit Ethernet standard
and the ANSI Fibre Channel specification and are suitable for interconnection in Gigabit Ethernet and Fibre Channel
environments.
Features :
Supports 9.95Gb/s to 10.3Gb/s data rates
Up to 100km on 9/125μm SMF
DWDM EML laser transmitter and APD photodetector
DWDM 50GHz ITU Grid C-band wavelength optional
Compliant with SFF 8472 and IEE802.3ae
Full duplex transceiver module
Duplex LC connector
Support Digital Diagnostic Monitoring interface
Hot-pluggable SFP footprint
Low power dissipation
Metal enclosure, for lower EMI
RoHS compliant and lead-free
Single +3.3V power supply
Operating case temperature: Standard : 0 to +70°C / Industrial : -40 to +85°C
Applications :
Gigabit Ethernet
DWDM systems
SONET OC-192/SDH STM-64
10G Fiber channel
P/N Product Description
X-DSFPP-10Gxxx-40D | DWDM SFP+, 10Gb/s, 40km, 50GHz, CH17~CH61, LC, 0-70 degree, with DDM |
X-DSFPP-10Gxxx-80D | DWDM SFP+, 10Gb/s, 80km, 50GHz, CH17~CH61, LC, 0-70 degree, with DDM |
X-DSFPP-10Gxxx-100D | DWDM SFP+, 10Gb/s, 100km, 50GHz, CH17~CH61, LC, 0-70 degree, with DDM |
X-DSFPP-10Gxxx-40D-IN | DWDM SFP+, 10Gb/s, 40km, 50GHz, CH17~CH61, LC, -40 to +85 degree, with DDM |
X-DSFPP-10Gxxx-80D-IN | DWDM SFP+, 10Gb/s, 80km, 50GHz, CH17~CH61, LC, -40 to +85 degree, with DDM |
X-DSFPP-10Gxxx-100D-IN | DWDM SFP+, 10Gb/s, 100km, 50GHz, CH17~CH61, LC, -40 to +85 degree, with DDM |
C-band λc Wavelength Guide - 50 GHz
About US
Address: Xinming High-tech Industrial Park, Y143
Bao'an District, Shenzhen, China
X-krama International Co., Limited
Product Category
E-mail:
Leave us a message: