P/N: X-TSFP-10G
Data Rate: 10 Gbps
Interface: RJ-45
Max Distance: 30 m (UTP6)
DDM Support: NO
Temperature: 0 to +70℃ (Comericial) / -40 to +85℃ (Industrial)
Certificates: CE / FCC / ROHS / SGS
Compatible: Cisco, HP, Brocade, Juniper Networks, H3C, Huawei, Arista Networks, etc. or Custom
Applications: Synchronous fiber optic network
Switch to switch interface
P/N: X-TSFP-10G
Data Rate: 10 Gbps
Interface: RJ-45
Max Distance: 30 m (UTP6)
DDM Support: NO
Temperature: 0 to +70℃ (Comericial) / -40 to +85℃ (Industrial)
Certificates: CE / FCC / ROHS / SGS
Compatible: Cisco, HP, Brocade, Juniper Networks, H3C, Huawei, Arista Networks, etc. or Custom
Applications: Synchronous fiber optic network
Switch to switch interface
The Copper SFP transceiver module is a module that supports hot plugging and the package form is SFP,
and the connector type is RJ45. In addition, since the transmission distance of the electrical interface module is
10-30m or 80-100m, the electrical interface module is mainly used for short-distance data transmission.
The Copper SFP transceiver module complies with SFP MSA and IEEE Std 802.3-2002 standards, and has the
characteristics of low power consumption, high performance, and compact design. In addition, the electrical interface
module can not only make up for the lack of SFP+ high-speed cable transmission distance, but also directly use the
existing copper cabling system to achieve a data transmission rate of 10G, while the use of SFP+ optical modules
requires optical cables for wiring. Will increase the cost of network deployment.
Features :
Support compatibility with 10Gbase-T / 5Gbase-T / 2.5Gbase-T / 1000base-T
Supports Links up to 30m using Cat 6A Cable
IEEE 802.3az and 802.3an Compliant
IEEE 802.3bz for 5G&2.5G BASE-T
Hot-pluggable SFP+ footprint
XFI/5GBASE-R/2500BASE-X/SGMII, SGMII Auto-Negotiation On
Extended case temperature range :0°C to 70°C(Standard), -40°C to 85°C (Industrial)
Fully metallic enclosure for low EMI
Low power dissipation (1.05 W typical)
Single +3.3V power supply
Compact RJ-45 connector assembly
10 Gigabit Ethernet over Cat 6a cable
Access to physical layer IC via 2-wire serial bus
RoHS compliant and lead-free
Comply with SFF-8431 and SFF-8432 MSA standard protocols
Applications :
1.25G /2.5G /5G 10G Ethernet over Cat 6A/7 cable
Fiber Chanel
Router/Server interface
Switch to Switch Interface
Switched Backplane Applications
P/N Product Description
X-TSFP-P1 | Copper SFP, 100Mbps only, RJ-45 100m (UTP5), 0-70 degree |
X-TSFP-P2 | Copper SFP, 10/100Mbps adaptive , RJ-45 100m (UTP5), 0-70 degree |
X-TSFP-P3 | Copper SFP, 1000Mbps only, RJ-45 100m (UTP5), 0-70 degree |
X-TSFP-P4 | Copper SFP, 10/100/1000Mbps adaptive , RJ-45 100m (UTP5), 0-70 degree |
X-TSFP-10G | Copper SFP, 10Gbps, RJ-45 30m (UTP6), 0-70 degree |
X-TSFP-P1-IN | Copper SFP, 100Mbps only, RJ-45 100m (UTP5), -40 to +80 degree |
X-TSFP-P2-IN | Copper SFP, 10/100Mbps adaptive , RJ-45 100m (UTP5), -40 to +80 degree |
X-TSFP-P3-IN | Copper SFP, 1000Mbps only, RJ-45 100m (UTP5), -40 to +80 degree |
X-TSFP-P4-IN | Copper SFP, 10/100/1000Mbps adaptive , RJ-45 100m (UTP5), -40 to +80 degree |
X-TSFP-10G-IN | Copper SFP, 10Gbps, RJ-45 30m (UTP6), -40 to +80 degree |
About US
Address: Xinming High-tech Industrial Park, Y143
Bao'an District, Shenzhen, China
X-krama International Co., Limited
Product Category
E-mail:
Leave us a message: