- Home
- Products
- Fiber Optic Transceivers
- FC/SDI/CPRI Transceivers
- WDM Network
- Open Line System
- POE Equipment
- Fiber Splitters
- Fiber Optic Cabling
- Fiber Cable Assemblies
- About US
- Contact us
10G SFP+ Transceivers
POE Splitter
Item: POE Splitter
Ports: 1*POE in ,1*Ethernet and 1*DC power out
Working Rate: 10/100/1000Mbps
Voltage input: DC44-57V
Voltage output: Default: DC12V; Optional: 5V/9V/24V
Power output: 15W/24W
POE Standards: IEEE 802.3af/at
Power Supply Pin: Default:1/2(+),3/6(-); Optional:4/5(+),7/8(-)
Applications: Family network
Diskless booting
Multimedia classroom
Monitoring
Wireless network
Item: POE Splitter
Ports: 1*POE in ,1*Ethernet and 1*DC power out
Working Rate: 10/100/1000Mbps
Voltage input: DC44-57V
Voltage output: Default: DC12V; Optional: 5V/9V/24V
Power output: 15W/24W
POE Standards: IEEE 802.3af/at
Power Supply Pin: Default:1/2(+),3/6(-); Optional:4/5(+),7/8(-)
Applications: Family network
Diskless booting
Multimedia classroom
Monitoring
Wireless network
PoE splitter,it is an economical and practical PoE remote power equipment base on IEEE802.3af standard.
It can separate the power and data via cable transmission.Proper matching use with poe switch or PSE injector
which meet standard IEEE802.3af,Provides power and data at the same time for the terminal device does not
support PoE.
PoE splitter, output voltage of 12V use with the power supply equipment, It helps to expand wireless city,
Security monitoring and other poe practical place, and is not restricted by layout of power line.It's applicable for
wide range of network products such as Access Points,Routers,IP Carmeras,Modems, Switches,Embedded computers or other network devices.
The transmission distance of POE splitter is normally form 100m.(The real distance depends on the power supply,type of cable and powered device.) PoE Splitter has realized the power supply and signal transmission in common cable system. Thus it can reduce engineering cost
( Isolated POE Splitter, 10/100/1000Mbps ethernet + DC 12V power port, output 24W, IEEE802.3af/at compliant )
● Supply power to HD network surveillance cameras with Cat5e (PoE)
● 1x 10/100Mbps RJ45 port+ 1*10/100M male output port+1*(5.5*2.1mm) DC output port
● Default output voltage is 12V DC, 5V DC output voltage can be customized, low ripple
● Support short circuit, over current, over temperature protection
● No additional power supply is required.Automatically detects and protects PoE equipments from being damaged
Specifications:
| Model | X-PD33512-at | |
| Interface Characteristics | ||
| Fixed Port | 2*10/100/1000Base-TX RJ45 port (Data) | |
| 1*DC5521 power port (Power) | ||
| Ethernet Port | Ethernet port can support 10/100Base-TX auto-sensing, full/half duplex MDI/MDI-X self-adaption | |
| Network Characteristics | ||
| Transmission Bandwidth (Rate) | 10/100/1000Mbps | |
| Twisted Pair Transmission | 10BASE-T: Cat3,4,5 UTP(≤100 meter) | |
| 100BASE-TX: Cat5 or later UTP(≤100 meter) | ||
| LED Indicator | Working indicator: POE (yellow) | |
| PoE & Power | ||
| PoE Port (PD) | PD port IEEE802.3af/at @ POE | |
| Network Protocol | IEEE802.3 10BASE-T, IEEE802.3i 10Base-T | |
| IEEE802.3u 100Base-TX, IEEE802.3x | ||
| Power Supply Pin | 1/2 (+), 3/6 (-),& 4/5 (+), 7/8 (-) | |
| Input Voltage | 44-57VDC | |
| Output Voltage | Default 12VDC± 0.5V, optional 5VDC± 0.5V | |
| Power Consumption | Standby<1W, | |
| Full Load<24W | ||
| Conversion Efficiency (Output: Input) | ≥82% | |
| Physical Parameter | ||
| Operation TEMP / Humidity | -20~+55°C;5%~90% RH Non condensing | |
| Storage TEMP / Humidity | -40~+85°C;5%~95% RH Non condensing | |
| Lightning protection / protection level | Lightning protection: 4KV 8/20us; Protection level: IP40 | |
| Certification & Warranty | ||
| Lightning protection / protection level | Port lightning protection: 4KV 8/20us, Protection level: IP30 | |
| Certification | CCC,CE mark, commercial; CE/LVD EN60950;FCC Part 15 Class B; RoHS | |
| Warranty | 3 years | |
P/N Product Description
X-PD31112 | Non-Isolated POE Splitter, 10/100Mbps ethernet + DC 12V power port, output 15W, IEEE802.3af/at compliant |
X-PD33112-at | Isolated POE Splitter, 10/100Mbps ethernet + DC 12V power port, output 24W, IEEE802.3af/at compliant |
X-PD33512 | Isolated POE Splitter, 10/100/1000Mbps ethernet + DC 12V power port, output 15W, EEE802.3af/at compliant |
X-PD33512-at | Isolated POE Splitter, 10/100/1000Mbps ethernet + DC 12V power port, output 24W, IEEE802.3af/at compliant |
Best Sales
About US
Address: Xinming High-tech Industrial Park, Y143
Bao'an District, Shenzhen, China
X-krama International Co., Limited
Product Category
E-mail:
Leave us a message：