Model
| X-E50802S-IN-L2M
|
Interface Characteristics
|
Fixed Port
| 8*10/100/1000Base-T
RJ45 ports (Data)
|
2*100/1000Base-X uplink SFP
fiber slot ports (Data)
|
1 * RS232 console
port(115200,N,8,1)
|
2 sets of V+, V- redundant
DC power interface (5 Pin Phoenix terminal)
|
Ethernet
Port
| Port 1-8 support
10/100/1000Base-T auto-sensing, full/half duplex MDI/MDI-X self-adaption
|
Twisted Pair Transmission
| 10BASE-T:
Cat3,4,5 UTP(≤100 meter)
|
100BASE-TX: Cat5 or later
UTP(≤100 meter)
|
1000BASE-T: Cat5e or later
UTP(≤100 meter)
|
SFP
Slot Port
| Gigabit SFP
optical fiber interface, default matching optical modules (optional order
single-mode / multi-mode, single fiber / dual fiber optical module. LC)
|
Optical Cable
| Multi mode:
850nm 0 ~ 500M,single mode: 1310nm 0 ~ 40KM, 1550nm 0 ~ 120KM.
|
Chip
Parameter
|
Network
Management Type
| L2+
|
Network Protocol
| IEEE802.3
10BASE-T, IEEE802.3i 10Base-T,
|
IEEE802.3u 100Base-TX,
|
IEEE802.3ab 1000Base-T
|
IEEE802.3z 1000Base-X
|
IEEE802.3x
|
Forwarding
Mode
| Store and
Forward(Full Wire Speed)
|
Switching
Capacity
| 192Gbps
|
Forwarding
| 14.88Mpps
|
Rate@64byte
|
MAC
| 8K
|
Buffer
Memory
| 4M
|
Jumbo Frame
| 9.6K
|
LED Indicator
| Power: PWR (yellow), system :SYS (yellow), network ;Link (yellow), Fiber port: L/A(green)
|
Reset
Switch
| Yes, Press
and hold the reset switch for 10s and release it to restore the
factory settings
|
Power
|
Working Voltage
| 48-57VDC,
5 Pin industrial Phoenix terminal, support anti-reverse protection.
|
Power
Consumption
| Standby<8W, Full
load<12W
|
Power
Supply
| No,
optional 24V/24W industrial
power supply
|
Physical Parameter
|
Operation
TEMP / Humidity
| -40~+80°C;5%~90%
RH Non condensing
|
Storage
TEMP / Humidity
| -40~+85°C;5%~95%
RH Non condensing
|
Installation
| Desktop, DIN
rail
|
Certification & Warranty
|
Port lightning protection / protection level
| Lightning
protection: 6KV 8/20us;Protection level: IP40
|
IEC61000-4-2(ESD):±8kV
contact discharge,±15kV air discharge
|
IEC61000-4-3(RS):10V/m(80~1000MHz)
|
IEC61000-4-4(EFT): power
cable:±4kV; data cable:±2kV
|
IEC61000-4-5(Surge):power
cable:CM±4kV/DM±2kV; data cable:±4kV
|
IEC61000-4-6(radio
frequency transmission):10V(150kHz~80MHz)
|
IEC61000-4-8(power
frequency magnetic field):100A/m;1000A/m ,1s to 3s
|
IEC61000-4-9(pulsed magnet
field):1000A/m
|
IEC61000-4-10(damped
oscillation):30A/m 1MHz
|
IEC61000-4-12/18(shockwave):CM
2.5kV,DM 1kV
|
IEC61000-4-16(common-mode
transmission):30V; 300V,1s
|
FCC Part
15/CISPR22(EN55022):Class A
|
IEC61000-6-2(Common
Industrial Standard)
|
Mechanical Properties
| IEC60068-2-6
(anti vibration)
|
IEC60068-2-27 (anti shock)
|
IEC60068-2-32 (free fall)
|
Certification
| CCC;CE mark,
commercial; CE/LVD EN60950;FCC Part 15 Class B; RoHS;
|
Warranty
| 5 years,
lifelong maintenance.
|
Network Management Features
|
Interface
| IEEE802.3X
(Full-duplex)
|
Port temperature protection
setting
|
Port green Ethernet
Energy-saving setting
|
Broadcast storm control
based on port speed
|
The speed limit of the
message flow in the access port.
|
The minimum particle size
is 64Kbps.
|
Layer 3 Features
| L2+ network
management ,IPV4/IPV6 management
|
L3 soft routing
forwarding,
|
Static route, Default
route @ 128 pcs, APR @ 1024 pcs
|
VLAN
| 4K VLAN based on
port, IEEE802.1q
|
VLAN based on the protocol
|
VLAN based on MAC
|
Voice VLAN, QinQ
configuration
|
Port configuration of
Access, Trunk, Hybrid
|
Port Aggregation
| LACP, Static
aggregation
|
Max 5 aggregation groups
and 8 ports per group.
|
Spanning
Tree
| STP (IEEE802.1d),RSTP (IEEE802.1w),MSTP (IEEE802.1s)
|
Industrial Ring Network Protocol
| G.8032
(ERPS),Recovery time less than 20ms
|
250 Ring at most, Max 1024
devices per ring.
|
Multicast
| MLD Snooping
v1/v2,Multicast VLAN
|
IGMP Snooping
v1/v2, Max 1024 multicast groups, Fast log out
|
Port
Mirroring
| Bidirectional
data mirroring based on port
|
QoS
| Flow-based Rate
Limiting
|
Flow-based Packet Filtering
|
8*Output queues of each
port
|
802.1p/DSCP priority
mapping
|
Diff-Serv QoS,Priority
Mark/Remark
|
Queue Scheduling Algorithm
(SP, WRR, SP+WRR)
|
ACL
| Port-based
Issuing ACL,ACL based on port and VLAN
|
L2 to L4 packet filtering,
matching first 80 bytes message. Provide ACL based on MAC, Destination MAC address, IP Source, Destination IP, IP Protocol Type, TCP/UDP Port, TCP/UDP
Port Range, and VLAN, etc.
|
Security
| IP-MAC-VLAN-Port
binding
|
ARP inspection,Anti-DoS
attack
|
AAA & RADIUS,MAC
learning limit
|
Mac black holes,IP source
protection
|
IEEE802.1X & MAC
address authentication
|
Broadcast storm
control,Backup for host datum
|
SSH 2.0,SSL,Port
isolation,ARP message speed limit
|
User hierarchical
management and password protection
|
DHCP
| DHCP Client,DHCP
Snooping,DHCP Server,DHCP Relay
|
Management
| One-key recovery
|
Cable Diagnose,LLDP
|
Web Management (HTTPS)
|
NTP,System work log,Ping
Test
|
CPU instant utilization
status view
|
Console/AUX
Modem/Telnet/SSH2.0 CLI
|
Download & Management
on FTP, TFTP, Xmodem, SFTP,SNMP V1/V2C/V3
|
ONV NMS - smart network
management system platform(LLDP+SNMP)
|
System
| Category 5
Ethernet network cable
|
Web browser: Mozilla
Firefox 2.5 or higher, Google browser chrome V42 or higher, Microsoft
Internet Explorer10 or later;
|
TCP/IP, network adapter,
and network operating system (such as Microsoft Windows, Linux, or Mac OS X) installed on each computer in a network
|